|
Clay's 2008 Shelby GT500. C&L CAI, TR-6 Plugs, CHE Lower control arms, SCT X-cal 3 tuned by Justin
Starkey.
Damian's 2001 Saleen S-281
5.4L SOHC utilizing
the factory Mustang intake and a set of Reichard Racing adapter plates, billet fuel rails, FRPP shorty racing headers, Bassani
off-road x-pipe, JLT true cold air intake tuned by Ken Bjonnes. Autometer gauges, UPR tubular k-member, QA1 tubular front
suspension with billet coilover struts, Centerforce dual friction clutch/pressure plate, billet short throw shifter, UPR rear
double adjustable upper and lower race control arms.
Shawn's 2008 Shelby G.T.500
Metco 2.60 upper S/C pulley, Metco 100mm tensioner,
AFCO dual pass heat exchanger, C&L Cold Air Intake system, TR6 plugs.
David's 1994 Mustang GT Convertible SCT Chip tuned by Ken Bjonnes. 5.0L with a Trick Flow
"Track Heat" setup including: Cam, Lifters, Springs, Aluminum Heads, Upper/Lower Intake, MAF, Injectors, BBK Throttle
Body, Shorty Headers, and a few other goodies.
Bill's 2005 Mustang GT
Hellion 66mm intercooled turbocharger kit, Teksid Block, Forged rotating assembly built by Larry H.
GT 500 Dual fuel pumps, Steeda Sport Springs, BMR upper/lower control arms/panhard bar, Granatelli Line locks, Auto Meter
gauges, Speed of Sound pillar pod, TCI torque converter. Custom dyno-tuned at Steigemier's by Eric Brooks from Brookspeed.
Click Here to Hear The Turbo Car Run
John's
1969 Shelby GT 350 Vintage Racer 408 c.i. Windsor, Edelbrock Aluminum Heads, World Class T-5, Willwood Big Brake kit.
Clayton's 2001 Mustang GT 4.7L Iron Shortblock Forged Rotating
Assembly (Manley rods and pistons) with high output 3V oil pump and Cobra oil pan/pickup, ARP head studs and rod bolts, Stage
I Comp Cams, Comp Valve Springs, MAC Cold Air Intake, MAC 70mm Throttle Body, MAC Upper Intake Plenum with EGR deletion, FRPP
shorty headers, MAC Off-road Prochamber, MAC Prodump Mufflers, Steeda Underdrive Pulleys, 50-250hp Dual Bottle Wet N2O kit,
Purge kit with remote bottle opener, Diablosport Predator tuned by Ken Bjonnes, professionally installed FRPP 3.73 gears with
new pinion seal, MAC Upper/Lower Control Arms, Pro 5.0 Shifter w/12v Hurst Pistol Grip for Hurst Roll Control Line Locks,
AutoMeter Gauge Pod, AutoMeter Ultra-light Gauges (N20 pressure, Boost/vacuum, Water Temp), Tach Adapter/Shift Light, Rear
Deep Dish 18" Bullitts. Weld-in subframe connectors, new headlights, new PCM/battery/crankshaft position sensor/gas tank
filler grommet.
Steve's
2005 Mustang GT This particular car was used during the 2005 year to advertise for Ford in the Michigan area.
If you have seen a Ford advertisement/publication or commercial with a Screaming Yellow convertible chances are it is this
one. Steve searched the whole country for this car and once located had it shipped to the Springfield area. Mods
include: Steeda sport springs and Hurst competition plus shifter.
Lance's 2005
Mustang GT Comp Stage II Mutha Thumpr cams w/ phaser limiters, JBA Ceramic Coated LT Headers, JBA O/R H-Pipe, FRPP 4.10
Gears, Steeda Economy CMVC Delete Plates, JLT II CAI, Bamachips 93 Race Tune, UPR Poly Motor Mounts, UMI Adjustable Swaybar
Endlinks, Baer Drilled/Slotted Rotors, 295/35/18 Rear, and 275/35/18 Front Tires. Roush front and side fascia, GT/CS
rear fascia, UPR TB spacer, UPR off-road x-pipe, Flowmaster axle-backs, 18" FR500 wheels, BMR lowering springs, Carbon
Fiber Hood, Custom Ebony paint with charcoal striping.
Randy's
2007 Mustang GT BBK Long Tube Headers, Bassani Off-road X-pipe, FRPP Charge Motion Control Delete Plates, Hurst Competition
Plus Shifter, MMR Cold Air Intake, Bassani Mufflers, SCT X-cal II tuned by Ken Bjonnes.
Mike's 2007 California Special
Hurst Competition Plus Shifter, Hood Pins,
Ford Racing "Borla Stinger" Mufflers.
Bryan's
2005 Mustang GT 100rwhp Zex Nitrous, 4.10 Gears, 18" 04 Cobra Wheels,
MMR Cold Air Intake, SCT X-Calibrator I
Tuning by Ken Bjonnes.
Travis's 1969 Mach 1 351 Windsor 4V,
C-4 Automatic, 9" Rear with disc brakes, March pullies, MSD Ignition, 17" Shelby Wheels.
 |
Jim's
2006 Mustang GT C&L Cold Air Intake, Long Tube Headers, Off-road X-pipe, Flowmaster axle-backs, Steeda
Sport springs, Steeda Tri-Ax shifter, FRPP 4.10 gears, 18" wheels, SCT X-cal II custom tuned by Ken Bjonnes.
Danny's 2001 Saleen S-281
2.60" upper S/C pulley, SCT X-cal
II custom tuned by Ken Bjonnes, C&L intake custom fitted by MIP, 4.10 rear gears, Saleen Off-road exhaust, MAC Pro-chamber
x-pipe.
Rob's 2007 Mustang GT Convertible JLT II Cold Air Intake System, X-Cal II custom tuned by
Ken Bjonnes, Steeda underdrive pulleys, FRPP charge motion control delete plates, Eibach Pro-kit lowering springs, Deep dish
bullit wheels 18", True-fiber GT500KR hood, Cobra front and rear fascia with spoiler, Pypes Violator Axle backs.
Jeannie's
1998 Cobra Bassani Off road X-pipe, MAC pro-dumps, 4.10 gears, XCal II custom tuned by Ken Bjonnes,
FRPP shorty headers, EGR delete, Steeda sport lowering springs.
2003 Terminator Cobra Roller
(Engine out but will sell with car) Custom air to air intercooled turbo kit with Masterpower t70
.96a/r turbo. C-5 Automatic, MAFia w/60#
Injectors, SCT X-Calibrator II, Tuning by Ken Bjonnes, Ford GT supercar pumps with pprv delete,
Lethal Performance stage 2 fpdm, C-5 auto (hardened 26spline input shaft, reverse manual vavle body, 9" continental converter,
Turbosmart dual stage boost controller, Weld Prostars.
Justin's
2008 Mustang GT Tokico D-spec adjustable shocks/struts, Steeda sport springs, K&N air filter, UPR off-road x-pipe.
Click here to see the Cobra "Make It Pay"
Matt's 2000 Mustang GT MAC Cold Air Intake, BBK Throttle
Body, MAC Shifter, Eagle Alloy Cobra Wheels, MAC Prochamber (off-road x-pipe), MAC Pro Dump Exhaust, MAC Upper/Lower Control
Arms, Cobra White Gauge Faces.
Mike's 1974 De Tomaso Pantera
408 Cleveland Stroker, Edelbrock Performer Aluminum Heads, Edelbrock
Air Gap Intake, MSD 6AL Ignition, MSD Billet Distributor, RaceTech HP 4 barrel, Paint by Clay Phillips.
Richard's
07 Mustang GT Automatic SCT X-cal II, a custom tune by Ken Bjonnes, off road exhaust and a Fram Air Hog air filter.
John's 2005 Mustang GT Flowmaster Exhaust, Hurst Shifter, BMR Suspension,
American Racing Wheels, Demolet CAI, SCT X-Calibrator II, Tuning by Ken Bjonnes.
John's 2005 Mustang GT DeMolet CAI, Zex 100rwhp Nitrous System, Xcal II
Tuned by Ken Bjonnes.
Rob's 2005 Mustang V6 Coupe GT500 Body Kit, Supercharged (X-charger), Line Locks,
Steeda Street Strip Control Arms, Steeda Adjustable Panhard Bar, 18" Wheels, Eibach Pro-kit Lowering Springs, SCT X-calibrator
II, Tuned by Doug @ Bamachips.
JR's Mitsubishi Eclipse Turbo Custom intercooled turbo system with header, off
road exhaust, turbo timer.
|
